Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I ca do static routing configuration after adding the command "ip routing" in the switch WS-C2960X-48LPD-L. So do i can use this switch as a L3 switch?
Anyone knows cisco DCNM(monitoring tool for Cisco nexus switches) credentials? I have X server. But i am not able to do further. Not able to find user credentials in any where. Please help me.
My Cisco 1700 series access points having already 2SSID's and each one is mapped to different Vlans(SSID1 to Vlan10, SSID2 to Vlan20). My requirement is i want to create one more SSID(SSID3) and i want to map in to same Vlan(Vlan 20). Is it possible...
Hi Guys,Please provide the recommended procedure to avoid Wireless radio channel range collision. The scenario is, there is 14Nos of Cisco 1700 series is connected in one hall. some of the area is having internet slow even signal strength is excelle...
This is the current scenario.Then we got another pool of ip from same isp(2.2.2.0/28).how i will nat by using this new public ip pool in firewall.Pls provide the solution.
I am also needed for this same issue, below are the logs.Sep 29 08:15:02: %MAB-5-FAIL: Authentication failed for client (0021.e1fe.b651) on Interface Gi6/12 AuditSessionID 35CB404A0000007400054CB8Sep 29 08:15:02: %MAB-5-FAIL: Authentication failed fo...
Thanks for your Update. Without enabling the command "sdm prefer lanbase-routing", i am able to configure static route, but unable to configure dynamic routing protocol.
If i am enabling SDM, what extra features will get?. Do i can use this switch as...
Hi Prakash,Yes you are right. It is not possible for different SSID with same Vlan. I got same error which you told last("the SSID is already linked to that VLAN'). Thanks Prakash....
