Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have an existing 5508 Controller for our Wireless Cisco AP-WiFi. The District just purchased a refurb 5508 with 25 Licenses to add in one of the outlying remote Schools.
1) Is it possible to backup the configuration from the existing 5508 and app...
I messed up my Cisco 3560 Switch
I downloaded the newest IOS for the switch and removed the old flash files to gain more room. I started installing the IOS like normal, then stepped away and when I came back I thought it had finished and reloaded ...
Will the c3560-ipservicesk9-mz.150-2.SE9.bin work on the WS-3560G Switch?
We are trying to keep a backup of all the downloaded IOS for our switches, and if we don;t need to download so many files then cataloging will be easy.
Thank you.
We have a Central Switch and remote Switches which recently we purchased a backup ISP link and I would like to know how to configure a point to point port.
1) Main IT Center - XYZ ISP = Cisco Router / Master Firewall / Main Network Routing Switch (Cu...
I have a 2950 Switch that I configured for the expanded Middle School Library. I can get the Vlan 100 to work, but I configured a few ports to Vlan 204, which is pushed via the Domain Switch and no go. I noticed that the configuration has an entry i...
Mark )
I found the error of our ways. The PC root FW was on and then the IOS file in the TFTP was an extraction from a higher version for another 3560G Switch.
I am sorry for the confusion.
You did great~!
Thank you.
Mark )
The link shows for a router - does it make a difference ?
Also it shows a rommon prompt. How do I get there from where I am at with the switch: ?
Thank you.
Masoud - Tunnel may be the correct terminology. I was told Point to Point by the ISP, so I just referenced that.
Topology - I will draw up something and attach it later.
Thank you.
