Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I am not sure why this is happening. We have a phone and windows PC on port fa0/11. Fa0/11 has dot1x enabled on it with the fail action to go to the next-method. The Windows PC fails MAB (first method) but the switch never moves on ot try dot1...
I've copied and pasted a dot1x and RADIUS config form another switch(WS-C3560-48PS-E) of ours that is known to be working to a new switch(WS-C3750-48PS-E). Both are running 12.2(55)SE7 . The issue seems to be that the AUTH-MGR is not passing the req...
I'm getting some odd behaviour with a Catalyst switch and 802.1x. I am using multi-auth, with a PC and Cisco Phone patched in. Both devices authenticate correctly, but only the PC is authorized based on the switch logs.
Switch terminal logs:
Apr 7 0...
Hey all, I am having an issue conceptual understanding how flow would work with the following. For Access Layer devices trying to leave the internal network.Notes:On the Core Nx7K's I have an HSRP of 10.0.0.1, also there is a static default gateway r...
Hi Neno,
Thank you for your help. I figured out that I was forgetting to add the dot1x pae authenticator interface command. It must have been cut off when I copied and pasted.
