Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
I am going to be upgrading a set of Cat 6500’s with Sup 720’s from the following version of software. Notice it is also a change of featureset. And according to the upgrade notes, the eFSU will fail its compatibility check when doing the up...
Hi there,
I recently setup two ASR9K's with a L2 link (Bundle-Ether1) between them and another L2 link from each of them to a switch. When I connected the ASR's together the first time, they started complaining about the following below. The strang...
Hi there,
I have been busy with a migration for a customer, from a pair of 7600's to the ASR 9000. What I am struggling with is the L2 side of things and spanning tree. I have setup all the necessary trunks, bridge domains, BVI's etc and everything...
Hi there,
I have been busy with a migration for a customer, from a pair of 7600's to the ASR 9000. What I am struggling with is the L2 side of things and spanning tree. I have setup all the necessary trunks, bridge domains, BVI's etc and everything...
Hi there,
Sorry I should have explained it better. The Bunde-ether1 is working fine with sub-interfaces and tagging traffic on various VLAN's. There are various servers connected to to other ports on the routers, belonging to various VLAN's. These po...
I think the key issue with the ASR9001 is that it didnt work with a TFTP_BLKSIZE of 1400. Once I changed it to 1024 (which is a setting I happened to choose by chance after trying every other conceivable combination of 5 different TFTP servers and an...
I spent a day and a half trying to get an ASR9001 stuck in ROMMON to boot an image via TFTP. Finally got it to work!!!!! The winning combination (for me at least) is to set the TFTP_BLKSIZE=1024 and to use Solarwinds Free TFTP server. Also make sure ...
