Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi
I need help with configuration for authenticate with Windows Radius Server for use AAA configuration on the network device.
The Radius Server is Windows Server 2012.
The Switch are, 2960x, 3850, 3650
Routers are 2900, 3900, 4400
WLC 5760
Thanks ...
Hi
I configure router 891, it has PoE ports but when I connecte Access-Point, iphone or Camara for Security does not work.
The configuration on port is
interface gi1
description *** HOST ***
switchport mode access
switchport access vlan 10
spanni...
Hi
I have a problem with recording calls, the user uses cisco jabber and the application for recording is CALLREX, but when the administrator of CALLREX listen voice recording mix hear voices others audios.
Hi
How configure remote spam in Cisco Nexus 3548???
I configured remote span in others switches for example 3850, but i not know configure in nexus 3548.
I use vlan 2 of voip and vlan 50 for remote spam.
Hi Fnu
I use only this commands
aaa new-model!!aaa group server radius SWITCH server 10.10.2.3 auth-port 1645 acct-port 1646!aaa authentication login default group SWITCH local enableaaa authentication enable default group SWITCH
But when putting ...
Hi
I try but not work
Configuration on switch
aaa new-model!!aaa group server radius SWITCH server 10.10.2.3 auth-port 1645 acct-port 1646!aaa authentication login default group radius local enableaaa authentication enable default group radiusaaa a...
Hi
Do you know when use remote-span.
I have
2 switches 3850 with user and the following configuration
monitor session 1 source vlan 2
monitor session 1 destination remote vlan 50
1 switch nexus 3548 I don have config
1 switch nexus 3548. In this ...
