Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Received new RV260 and setup 4 VLANS and attached it to its port so VLAN 1 goes to port 1. Each VLAN is a different network. VLAN 1 is working fine with hooked up. When VLAN 2 was hooked up it took the settings for VLAN 4. VLAN 3 was setup for a wi...
I have had several co-workers help me with my problem having a local 2504 being hacked and changing the admin password and the AP passwords. We believe they are somehow using the Recover-Password option. Is there a way to disable this on the device?
I have a Cisco 2504 WLC controlling 5 AP's. right now the web interface on the 2504 will not come up but I need to reset the AP password so users can use the wireless. I can get into the wlc through console. Can someone provide the commands that can ...
Have an SG300-28P that stopped responding and cannot connect through the serial port using putty. Any item that is plugged into this cannot communicate with any other device. I tried the factory reset and saw all lights flash twice but the system li...
I have a 2504 WLC currently in place hosting 6 CAP's. Are there good instructions on setting up the web authentication piece? I have a Windows 2008 server that runs IIS on it. I have found basic information about the 4400 but nothing specific about t...
Yes understand that but the problem I have is that as soon as I set one to the untagged it wants to reverse which one is tagged. Each vlan is on its own port and lining those up to be untagged on each row. This is what the first vlan has and it works...
I have disabled snmp 2 and added v3. ssh is already enabled and telnet disabled. http is disabled and https is available. management over the wireless is not checked. I saw the box about remote management of AP's but did not disable that currently. C...
