Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I have issue getting file from Prime shell. I need to send this file via tftp to my tftp server (which is on my computer; I use tftpd64 application on my computer for this). Problem is: How do I send file to my TFTP server (my computer)? Do I hav...
Hi. I have a problem with my IPsec on a Cisco ASR1002 router. I suspect that problem is because I configured Loopback as interface that has to be on a ASR1002. Does anybody knows is it possible to configure Loopback interface on ASR1002 for IPsec tun...
Hi
I solved HTTP CORE high CPU utilization issue using your suggestions. To be more precise, I solved issue with this:
"4) If you are using http and if the issue was due to HTTP request to the switch, the command "no ip http secure-server" would ...
I solved this.
I used next command in shell: tftp <IP_Address> -c put <file_path>
Also, I had a problem with TFTPD64 client on my computer. I had to disable TFTP Security (Settings > TFTP tab > "TFTP Security" selection quadrant). Because of this Se...
Hi,
Did anyone find a solution for this problem? I have similar problem on my VPN-NAS (Network Access Server) which is Cisco 1921 with 15.0(1r)M12 IOS.
Problem: When I turn on "ip dns server" on my router, my CPU usage "hit the roof" (99%). I can no...
Hi Marcin Latosiewicz and nkarthikeyan,We are talkin about encrypting traffic between CE-CE routers, and encrypting customer traffic (just payload). In this case, I think, that we are not talking about IPsec tunnels, then we are talking about just ab...
