Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
My proxy inserts XFF header by default. Some of HTTPS websites do not work if I do HTTPS interception. First I bypassed those websites from HTTPS interception and they started to work. Then I kept HTTPS interception enabled but disabled XFF intercept...
Hello All,
I have a very basic query on Collision Domain and Full Duplex Mode. There are two types of logical topology ; Ethernet and Token Ring .
Whenever we read about Ethernet the first thing that we are taught is CSMA/CD. It says that in Ethern...
Here is the query.
I have a Windows server 2012 at 10.10.1.200. The gateway is 10.10.1.1 . I am using 10.10.1.200 as the DNS server. I have configured DNS server on 10.10.1.200. In the DNS server settings I have not mentioned any forwarder.
Now f...
Here is the question.When and Why do we decrease MSS instead of MTU.In the router that we can configure both of them separately.Suppose I have kept MSS as 1260.I have not made any changes to the MTU. Now if the TCP and the IP header do not have any ...
I have 10 public ip addresses and I have only 1 WAN port . So I have created aliases on the WAN port of the firewall . Then I have forwarded the ports of all the public ips to internal machines . The questions I have 1. Will the alias broadcast ...
Two Scenarios.1.The network setup is as follows.There is one firewall .I have two computers in the network. i have created a DMZ with network 192.168.1.0/24 and a LAN zone with network 192.168.2.0/24. By default the LAN to WAN is allow . I have cre...
Thank you for the answer . Now I have some more questions related to alias.1.How many broadcast domain would be present ?2.In the ARP for the 17.16.16.1/24 will i get any response from 172.16.17.1/24?3.Can an alias port act as a DHCP server.4.If the...