Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
A site,
one UCS with 7 blades,there is a vic 1340 in each blade.
two MDS c9148s,named MDS A01,MDS A02
one EMC VNX5200 storage
B site,
one MDS c9148s,named MDS B01
one EMC VNX5200 storage
the distance between two sites are about 6 km,there is a nativ...
UCSM version:3.1(2e)
blade is B200m4,half width blade
VIC 1340
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/Reference-Docs/Configuration-Limits/3-1/b_UCS_Configuration_Limits_3_1.pdf
from the above document,
Max vNICs for Hy...
the following is the output of the command.
I use smart-zone
there is no * with pwwn 50:06:01:60:89:60:2a:ea,and no target behind this pwwn.
there is no target behind the pwwn 50:06:01:6a:09:60:2a:ea
#show zoneset active
zoneset name SmartZoneset vs...
I configured UCS recently,I got the code="F0207",both vNIC and vHBA are link down.the ethernet port channel and SAN port channel are up.
UCSM running version:3.1(2b)
IOM running version:3.1(2b)
FI running version:3.1(2b)
VIC adapter 1 of server 1
fir...
i associated the compute security porfile CSP001 with port profile of nexus 1000v.the result of ping a host is reply from...the following is the configurationconfigureport-profile forvsgvservice node vsg1 profile CSP001org rooti cloned compute securi...
