Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
Bookmark
|
Subscribe
|
862
Views
0
Helpful
4
Replies

smart-zone

YI-MING TSAI
Level 1
Level 1

‎02-20-2017 01:54 AM

the following is the output of the command.

I use smart-zone

there is no * with pwwn 50:06:01:60:89:60:2a:ea,and no target behind this pwwn.

there is no target behind the pwwn 50:06:01:6a:09:60:2a:ea

#show zoneset active

zoneset name SmartZoneset vsan 4091
  zone name SmartZone vsan 4091
    pwwn 50:06:01:60:89:60:2a:ea
  * fcid 0x610100 [pwwn 50:06:01:6a:09:60:2a:ea]
  * fcid 0x610202 [pwwn 20:00:00:25:b5:aa:00:1f]  init
  * fcid 0x610203 [pwwn 20:00:00:25:b5:aa:00:6e]  init
  * fcid 0x610204 [pwwn 20:00:00:25:b5:aa:00:3f]  init
  * fcid 0x610205 [pwwn 20:00:00:25:b5:aa:00:0f]  init
  * fcid 0x610206 [pwwn 20:00:00:25:b5:aa:00:2f]  init
  * fcid 0x610207 [pwwn 20:00:00:25:b5:aa:00:6f]  init
  * fcid 0x610208 [pwwn 20:00:00:25:b5:aa:00:4f]  init
  * fcid 0x610209 [pwwn 20:00:00:25:b5:aa:00:5f]  init
  * fcid 0x61020a [pwwn 20:00:00:25:b5:aa:00:5e]  init
  * fcid 0x61020b [pwwn 20:00:00:25:b5:aa:00:2e]  init
  * fcid 0x61020c [pwwn 20:00:00:25:b5:aa:00:7e]  init
  * fcid 0x61020d [pwwn 20:00:00:25:b5:aa:00:4e]  init
  * fcid 0x61020e [pwwn 20:00:00:25:b5:aa:00:3e]  init
  * fcid 0x61020f [pwwn 20:00:00:25:b5:aa:00:0e]  init
  * fcid 0x610210 [pwwn 20:00:00:25:b5:aa:00:1e]  init
  * fcid 0x610211 [pwwn 20:00:00:25:b5:aa:00:6d]  init
  * fcid 0x610212 [pwwn 20:00:00:25:b5:aa:00:7d]  init
  * fcid 0x610213 [pwwn 20:00:00:25:b5:aa:00:4d]  init
  * fcid 0x610214 [pwwn 20:00:00:25:b5:aa:00:5d]  init
  * fcid 0x610215 [pwwn 20:00:00:25:b5:aa:00:2d]  init
  * fcid 0x610216 [pwwn 20:00:00:25:b5:aa:00:6c]  init
  * fcid 0x610217 [pwwn 20:00:00:25:b5:aa:00:3d]  init
  * fcid 0x610218 [pwwn 20:00:00:25:b5:aa:00:0d]  init
  * fcid 0x610219 [pwwn 20:00:00:25:b5:aa:00:1d]  init
  * fcid 0x61021a [pwwn 20:00:00:25:b5:aa:00:7c]  init
  * fcid 0x61021b [pwwn 20:00:00:25:b5:aa:00:4c]  init
  * fcid 0x61021c [pwwn 20:00:00:25:b5:aa:00:5c]  init
  * fcid 0x61021d [pwwn 20:00:00:25:b5:aa:00:2c]  init

# sh zone status
VSAN: 1 default-zone: deny distribute: active only Interop: default
    mode: basic merge-control: allow
    session: none
    hard-zoning: enabled broadcast: unsupported
    smart-zoning: disabled
    rscn-format: fabric-address
Default zone:
    qos: none broadcast: unsupported ronly: unsupported
Full Zoning Database :
    DB size: 4 bytes
    Zonesets:0  Zones:0 Aliases: 0
Active Zoning Database :
    Database Not Available
Current Total Zone DB Usage: 4 / 2097152 bytes (0 % used)
Pending (Session) DB size:
    Full DB Copy size: n/a
    Active DB Copy size: n/a
SFC size: 4 / 2097152 bytes (0 % used)
Status:
VSAN: 4091 default-zone: deny distribute: active only Interop: default
    mode: basic merge-control: allow
    session: none
    hard-zoning: enabled broadcast: unsupported
    smart-zoning: enabled
    rscn-format: fabric-address
Default zone:
    qos: none broadcast: unsupported ronly: unsupported
Full Zoning Database :
    DB size: 796 bytes
    Zonesets:1  Zones:1 Aliases: 0
Active Zoning Database :
    DB size: 404 bytes
    Name: SmartZoneset  Zonesets:1  Zones:1
Current Total Zone DB Usage: 1200 / 2097152 bytes (0 % used)
Pending (Session) DB size:
    Full DB Copy size: n/a
    Active DB Copy size: n/a
SFC size: 1200 / 2097152 bytes (0 % used)
Status: Activation completed at 01:31:39 UTC Jun 24 2000
#sh flogi da
--------------------------------------------------------------------------------
INTERFACE        VSAN    FCID           PORT NAME               NODE NAME      
--------------------------------------------------------------------------------
fc1/9            4091  0x610000  50:06:01:61:09:60:2a:ea 50:06:01:60:89:60:2a:ea
fc1/25           4091  0x610100  50:06:01:6a:09:60:2a:ea 50:06:01:60:89:60:2a:ea
port-channel41   4091  0x610200  24:29:8c:60:4f:f7:a6:00 2f:fb:8c:60:4f:f7:a6:01
port-channel41   4091  0x610202  20:00:00:25:b5:aa:00:1f 20:00:00:25:b5:11:11:0f
port-channel41   4091  0x610203  20:00:00:25:b5:aa:00:6e 20:00:00:25:b5:11:11:0f
port-channel41   4091  0x610204  20:00:00:25:b5:aa:00:3f 20:00:00:25:b5:11:11:0f
port-channel41   4091  0x610205  20:00:00:25:b5:aa:00:0f 20:00:00:25:b5:11:11:0f
port-channel41   4091  0x610206  20:00:00:25:b5:aa:00:2f 20:00:00:25:b5:11:11:2f
port-channel41   4091  0x610207  20:00:00:25:b5:aa:00:6f 20:00:00:25:b5:11:11:2f
port-channel41   4091  0x610208  20:00:00:25:b5:aa:00:4f 20:00:00:25:b5:11:11:2f
port-channel41   4091  0x610209  20:00:00:25:b5:aa:00:5f 20:00:00:25:b5:11:11:2f
port-channel41   4091  0x61020a  20:00:00:25:b5:aa:00:5e 20:00:00:25:b5:11:11:1f
port-channel41   4091  0x61020b  20:00:00:25:b5:aa:00:2e 20:00:00:25:b5:11:11:1f
port-channel41   4091  0x61020c  20:00:00:25:b5:aa:00:7e 20:00:00:25:b5:11:11:1f
port-channel41   4091  0x61020d  20:00:00:25:b5:aa:00:4e 20:00:00:25:b5:11:11:1f
port-channel41   4091  0x61020e  20:00:00:25:b5:aa:00:3e 20:00:00:25:b5:11:11:2e
port-channel41   4091  0x61020f  20:00:00:25:b5:aa:00:0e 20:00:00:25:b5:11:11:2e
port-channel41   4091  0x610210  20:00:00:25:b5:aa:00:1e 20:00:00:25:b5:11:11:2e
port-channel41   4091  0x610211  20:00:00:25:b5:aa:00:6d 20:00:00:25:b5:11:11:2e
port-channel41   4091  0x610212  20:00:00:25:b5:aa:00:7d 20:00:00:25:b5:11:11:3e
port-channel41   4091  0x610213  20:00:00:25:b5:aa:00:4d 20:00:00:25:b5:11:11:3e
port-channel41   4091  0x610214  20:00:00:25:b5:aa:00:5d 20:00:00:25:b5:11:11:3e
port-channel41   4091  0x610215  20:00:00:25:b5:aa:00:2d 20:00:00:25:b5:11:11:3e
port-channel41   4091  0x610216  20:00:00:25:b5:aa:00:6c 20:00:00:25:b5:11:11:0e
port-channel41   4091  0x610217  20:00:00:25:b5:aa:00:3d 20:00:00:25:b5:11:11:0e
port-channel41   4091  0x610218  20:00:00:25:b5:aa:00:0d 20:00:00:25:b5:11:11:0e
port-channel41   4091  0x610219  20:00:00:25:b5:aa:00:1d 20:00:00:25:b5:11:11:0e
port-channel41   4091  0x61021a  20:00:00:25:b5:aa:00:7c 20:00:00:25:b5:11:11:1e
port-channel41   4091  0x61021b  20:00:00:25:b5:aa:00:4c 20:00:00:25:b5:11:11:1e
port-channel41   4091  0x61021c  20:00:00:25:b5:aa:00:5c 20:00:00:25:b5:11:11:1e
port-channel41   4091  0x61021d  20:00:00:25:b5:aa:00:2c 20:00:00:25:b5:11:11:1e

Labels:
0 Helpful
4 Replies 4

syedmehdi2
Level 1
Level 1

‎02-25-2017 04:37 PM

Are you able to access the storage at server level? Check the status of Targets at storage side(Emc). If targets are healthy at storage side then shut and no shut..

Then edit the zones and manually add target in front off PWWn.

In case, if System is in production first work on first fc1/9 and fix it. Check speed and administrative/operation status.

share the out put of the following command

#sh int br

#sh int fc1/9  tran

#sh int fc1/9 capa

0 Helpful

Walter Dey
VIP Alumni
VIP Alumni

‎02-27-2017 10:00 PM

there is no * with pwwn 50:06:01:60:89:60:2a:ea,and no target behind this pwwn.

no * means that this pwwn didn't do a flogi ? maybe this is a typo ?

Are you using alias (device or fc) ?

0 Helpful

YI-MING TSAI
Level 1
Level 1
In response to Walter Dey

‎02-28-2017 01:51 AM

Hi Waltter ,

I did not use alias.

0 Helpful

YI-MING TSAI
Level 1
Level 1

‎02-28-2017 01:45 AM

thank you for your help.

I cleared the zone and zoneset then reload the MDS switch.I created the zone and zoneset again.

now it works fine.

0 Helpful
Customers Also Viewed These Support Documents

Review Cisco Networking for a $25 gift card

Top