Question : Nested RPL – What is the Sequence for the DATA - So from the RPL at the final end policy TO_OUTSIDE we nest the two RPL that preform two separate functionsOne looks for a prefix the other a AS path. The Question when the fi...
What is the Community standard. We could advertise up to 12 AS-PATH or should we be polite and just advertise One AS-path and keep our internal PATH numbers inside. ? Sample 500, 400,400,400, 300, 200,200,200,200,200,200,200,100
HiHappy Holidays We are trying to configure a DWDM interface from one asr 9k to another asr 9k both are running ios-xr 5.1.3and both DWDM transceivers are in a A9k-MPA-4x10GE Spa within a A9k-mod80-tr. our configuration goes like this : Can anybody ...
Hi All Happy Holidays Question :We have a ASR9006 with a A9K-RPS-4G running a ios-xr ver 4.2.1 P style OS.due to a bug we have encountered we are upgrading to ver 5.1.3 which are PX pies. We would like to know if the RSP-4G card can run IOS-XR 5.1....
We have 18 nodes al ons15454 family .We have two rings , each one has a Gateway to our network at one location.Using version 10 of the Standalone CTCONS15454 nodes just upgraded to version 9.8, mix of tcc2p(lite) and TNC ( full ) cards.We ussaly sig...
From last update , cabling was going out to check our z site , it was found that the cabling was crossed with another build using the same lamba.Once this was corrected the second link came up but ours did not. Troubleshooting found that the TX on th...
Update we may suspect that the cabling may have been crossed over to another circuit build that was under way. Cabling to Verify and report back. Will update with status when completed.
The transceivers were purchased from a Cisco partner. Tac case SR 633175547 : Interface down down between a DWDM transceivers on the ASR9k platform R1 Wed Dec 31 11:33:57.778 EST Optics Status Optics Type: 10G-TUNABLE-by-CHANNEL, ...
To correct the first errorR1 Wed Dec 31 11:20:36.563 ESTTenGigE0/1/0/0 is down, line protocol is down Interface state transitions: 2 Hardware is TenGigE, address is e0ac.f12d.0f88 (bia e0ac.f12d.0f88) Layer 1 Transport Mode is WAN Description: [...