Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi!I have a weird problem: some subnets behid fwsm are not workig.For example: I have a subnets called "SFPRD-Business_GxP" inside the firewall. When a server on this network tries to reach another server (in this case 172.10.2.142) on the Outside in...
Hi,I have two 6509 interconnected with a trunk interface. On this interface, with other vlan, is active the vlan 120.The vlan 120 is configured in HSRP:6509 Primaryinterface Vlan120 description "LAN 120" ip address 192.168.120.2 255.255.255.0 ip acce...
Hi, I have a big problem here.I have a 5520 ASA and I've upgrad the iOS from 8.4(2) to 9.0(4), SSL VLP and AnyConnect works but L2TP is dead, and I don't know why.The client receive error 809. The ASA is behind Internet Firewall that NAT the original...
Hi to all,I have a problem with a remote office. In this Office some users open a Microsoft Access DB via fileshare. The DB size if about 5 mbytes.They have latency and slow responding when they insert the data in the form.This is our network:REMOTE ...
Hi,I have a question.We have some VPN with Cisco ASA 5520.The laptops are part of the corporate domain (Microsoft Active Directory) and are associated with the internal DNS. When you connect to VPN, the internal DNS is not updated with the IP address...
Hi, thank you for both answers.I resolved the issue... I don't know why in the ACL only IP traffic was open.I added the rule: permit udp 192.168.120.0 0.0.0.255 host 224.0.0.2and now the HSRP works very well. Thank you.
Thank you for you replies.Yes I am using version 4.3.3.I've done some tests, with and without compression but the poor performance are still here. If I open the MS Access DB from fileshare I encouter app hangs and nothing works.I think that I must co...
As mentioned before I've tried to reseat the module in the same slot and also in another slot.. but nothing changed. But, If I reseat the module without the CF I have this log: %C6KPWR-SP-4-DISABLED: power to module in slot 4 set off (Module Failed ...
Problem solved, but can't believe that. There was a sort of NAT that send any request for the management IP to a server. Only for the management, all the other traffic goes well.For example: in Windows, if I do \\management IP\c$ it opens the server ...
