Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello; I have the problem that the timspn is to shot for analysing connection troubles.What is a working solution to increase the timespan, or to download the connection event history?many Thanks, Thomas
Hello; We have a ASA 5515 as VPN Portal, and a ISE 2.7 for allowing the Domain Users to connect with Posturing to our Network.So far so good, everything works fine.Now i want to upgrade the annyconnect Client and get this Error when i try to login to...
Hello;We are running a Firepower 2110 and it works fine so far.We have an official IP Address with NAT to one of our private Exchange CAS Server.I want that only the Port 80,443,587 are accessible from the Internet, what is the best way to restrict t...
Hello;I have the problem that my users need at minimum 2 attempts for a stable VPN connection with any connect.Is there a known issue for this behavior?ASA 5515-version 9.12(4), any connect 4.803052, Thanks + Sorry for my bad English, Greetings, Thom...
Hello;
I accedently deleted the flash directory(nervous fingers, my fault), but the switch is still running.
i copied a new IOS, cat3k_caa-universalk9.SPA.03.06.06.E.152-2.E6.bin to the flash an saved the current config.
When i install the new IOS w...
Thanks for the Reply, i have the Problem that users who try to connect with the ISE Posturing Policyare not allowed to download the upgraded anyconnect webdeploy client provided by the ASA VPN Portal. With the old anyconnect local User on the ASA we...
Hi Julio;
Thanks, i followed your advice and get:
Switch#show boot---------------------------Switch 2---------------------------Current Boot Variables:BOOT variable = flash:cat3k_caa-universalk9.SPA.03.06.06.E.152-2.E6.bin;flash:cat3k_caa-universalk...
