Hello!I have a problem with 7925 Wifi phones. I have four Cisco 8961 which work, and they use the same TFTP and CUCM as 7925G.The 7925G get the correct number from CUCM and can make/receive calls. But they ignore configuration I make in CUCM (Locale,...
Hi,I have found a guide which explains how to integrate Office 365 (Lync 2013) with CUC 8.6 and later : Unified Messaging Guide for Cisco Unity Connection Release 8.5 and Later - Configuring Cisco Unity Connection 8.5 and La…Is there a similar guide...
Hello guys!I need help to allow access to internet for my vpn users. I can connect with Anyconnect but have no internet access. Subnet for VPN is 192.168.100.0. I have allowed this subnet on my cisco router.ISP -> Router (887VA) -> 192.168.0.0 -> ASA...
I have not found any precise documentation. However, CuciLync seems to work perfectly using the CSF device created for Jabber. No additionnal configuration was needed, only the installation of CuciLync on Lync 2013.
Alright, we have found that the cause of the problem is that 7925 phones initiate TFTP req with source 1024 UDP and dest port 69. The call manager responds to this port (1024 UDP) and it is blocked by our firewall (in the returning path).Does anybody...
Hello,Thank you for your help.There is no record in Cluster View.The weird thing is that 8961 contacts the same TFTP as 7925G, and they applied french locale configured in CUCM. But when I capture from CLI on port 69 after reset, I do not see the .cn...
Maybe it is the firewall which is blocking TFTP between wifi phones and TFTP? In phone logs I see :2014-01-26 16:36:53:0550 CP-7925G user.err fwupdate[306]: downloading CP7925G-1.4.5.3/JSYSH-1.4.5.3.SBN failed: Exceeded Max number of retries[11]).I u...
