About Alejandro Madurga Ainoza

Alejandro Madurga Ainoza · ‎02-05-2019

Hi, well I mean something like the load merge on the cli, where we can put a bunch of lines to configure multiple paths of the configuration in one shot.

Alejandro Madurga Ainoza · ‎02-05-2019

Hi all, I'm trying to run commands on devices (configurations) using the RESTCONF API, but I'm struggling to find how to execute multi line commands and then do a Dry-Run. I was able to run single line commands, but not commit them. Any hint here? Best regards, Alex.

Alejandro Madurga Ainoza · ‎02-01-2019

Thanks a lot for the answers! now it is crystal clear.

Alejandro Madurga Ainoza · ‎02-01-2019

Hi, thanks for the answer! The use case, is as follows: HA environment with a Master and Slave For now, only backups are scheduled on the Master node via cron (once a day), In case of Master failure, then the Slave takes the master role. In case of extended period of time of failover, there is need of create backups on the the new Master. We are thinking to take backups on both nodes (Master and Slave) periodically, but we don't know what are the limitations/dependencies of those backups, ie, in case of total disaster, the recovery can be done using any of the backups (Master or Slave) or the backups are role/vm dependant. Thanks in advance, Alex.

Alejandro Madurga Ainoza · ‎01-30-2019

Hi all, I'm looking for best practices regardin backup and restore when the HA is activated. My main concern is if the backups are interchangeable or not, if there is a backup done on the Master node, can be used to recover a slave node? Are the backups independant in terms of HA roles? The main issue is to have a clear picture on how to manage backups in case of failover during an extended period of time (more than one day). Thanks in advance, Alex.

Alejandro Madurga Ainoza · ‎01-21-2019

Hi all, first post on the community! I'm trying to understand how the product scalates, horizontally and vertically, from the vertical option, I'm guessing what are the steps to do to enable more memory on the APP, ie upgrade the memory from 8GB to 32GB, is it necessary to configure the java memory parameter somewhere? same goes for the CDB? is it necessary to change any config to flag the app that there is more memory available? Thanks in advance!

Alejandro Madurga Ainoza · ‎06-19-2018

Auth method was changed to allow either the username or the email, drop me an email and I can check what is going on.

Alejandro Madurga Ainoza · ‎11-10-2017

Hi, You need to install the git client, if there is internet connection you can use yum. Best regards, Alex. Enviado desde mi smartphone Samsung Galaxy.

Alejandro Madurga Ainoza · ‎11-07-2017

As promised, you can find the related tasks here: UCSD Custom GIT Integration

Alejandro Madurga Ainoza · ‎11-07-2017

As promised, you can find the related tasks here: UCSD Custom GIT Integration

Alejandro Madurga Ainoza · ‎11-07-2017

Fixed some bugs and added the option to import content from a previous commit. Find attached the Integration Custom Tasks from the following Video: Video Link : 16714 Enjoy!

Alejandro Madurga Ainoza · ‎11-06-2017

Hi, the scripts are not yet finalized, so I'll share them when some details are polished (ie, they are exporting all script modules used or not on the workflows). Stay tuned!

Alejandro Madurga Ainoza · ‎11-05-2017

Hi all, find a way to integrate UCSD with GIT, and allow to edit the custom task code, inputs and outputs directly on your laptop, no more clicking! Video Link : 16714 Enjoy!

Alejandro Madurga Ainoza · ‎11-05-2017

This is a heavily demanded by agile customers. So in this case, this integration will allow to push and pull Workflows, Custom Tasks, and Script Modules into the UCSD, move content between different UCSD Servers, AND EDIT CUSTOM TASKS WITHOUT USING THE UCSD GUI, this is something that will save TONS of time in implementations. You can find the Tasks here: UCSD Custom GIT Integration

Alejandro Madurga Ainoza · ‎04-08-2016

You can add variables to any task using the ${variablename} format. That only works with workflow defined variables, for variables coming from other tasks on the workflow it should be like: ${TASKNAME.OUTPUTNAME} so your script look like: mode fabbricpath ${mytaskname.myoutputname}

Alejandro Madurga Ainoza · 02-05-2019

Hi, well I mean something like the load merge on the cli, where we can put a bunch of lines to confi...

Alejandro Madurga Ainoza · 02-05-2019

Hi all, I'm trying to run commands on devices (configurations) using the RESTCONF API, but I'm strug...

Alejandro Madurga Ainoza · 02-01-2019

Thanks a lot for the answers! now it is crystal clear.

Alejandro Madurga Ainoza · 02-01-2019

Hi, thanks for the answer! The use case, is as follows: HA environment with a Master and Slave For n...

Alejandro Madurga Ainoza · 01-30-2019

Hi all, I'm looking for best practices regardin backup and restore when the HA is activated. My main...

Alejandro Madurga Ainoza · 01-21-2019

Hi all, first post on the community! I'm trying to understand how the product scalates, horizontally...

Alejandro Madurga Ainoza · 06-19-2018

Auth method was changed to allow either the username or the email, drop me an email and I can check ...

Alejandro Madurga Ainoza · 11-10-2017

Hi,You need to install the git client, if there is internet connection you can use yum.Best regards,...

Alejandro Madurga Ainoza · 11-07-2017

As promised, you can find the related tasks here:UCSD Custom GIT Integration

Alejandro Madurga Ainoza · 11-07-2017

As promised, you can find the related tasks here:UCSD Custom GIT Integration

Alejandro Madurga Ainoza · 11-07-2017

Fixed some bugs and added the option to import content from a previous commit. Find attached the Int...

Alejandro Madurga Ainoza · 11-06-2017

Hi,the scripts are not yet finalized, so I'll share them when some details are polished (ie, they ar...

Alejandro Madurga Ainoza · 11-05-2017

Hi all,find a way to integrate UCSD with GIT, and allow to edit the custom task code, inputs and out...

Alejandro Madurga Ainoza · 11-05-2017

This is a heavily demanded by agile customers. So in this case, this integration will allow to push ...

Alejandro Madurga Ainoza · 04-08-2016

You can add variables to any task using the ${variablename} format.That only works with workflow def...

Date Registered	‎11-18-2013 01:31 AM
Date Last Visited	‎02-12-2019 07:51 AM
Total Messages Posted	28
Total Helpful Votes Received	6

Re: How to run commands on devices usin...

How to run commands on devices using RE...

Re: Backup on HA configuration.

Re: Backup on HA configuration.

Backup on HA configuration.

NSO - Memory Configuration for vertical...

Re: UCSD Custom GIT Integration

Re: UCSD Custom GIT Integration

Re: UCSD - GIT Custom Integration

Re: UCSD - GIT Custom Integration

UCSD Custom GIT Integration

Re: UCSD - GIT Custom Integration

UCSD - GIT Custom Integration

UCSD - GIT Custom Integration

Re: UCSD Custom Enhanced SSH (Credentia...

Re: How to run commands on devices using RESTCONF

How to run commands on devices using RESTCONF

Re: Backup on HA configuration.

Re: Backup on HA configuration.

Backup on HA configuration.

NSO - Memory Configuration for vertical scalability

Re: UCSD Custom GIT Integration

Re: UCSD Custom GIT Integration

Re: UCSD - GIT Custom Integration

Re: UCSD - GIT Custom Integration

UCSD Custom GIT Integration

Re: UCSD - GIT Custom Integration

UCSD - GIT Custom Integration

UCSD - GIT Custom Integration

Re: UCSD Custom Enhanced SSH (Credential Policy)