An unused FPR-2110(ASA) device enter ROMMON mode after i plus the power, I enter the "boot" command, the system can start. I search the cisco.com,but don't find how to resove it.(I find some web that need to reimage, but i am not sure.)
问题：asa在配置了AAA认证授权统计之后，如何实现console口通过本地登录授权。配置如下：username cisco password cisco123 privilege 15aaa authentication serial console LOCALaaa authentication enable console group LOCALaaa authorization command group LOCAL
i have some problems about packet-tracer in ASA9.8, The asa config Static NAT and dynamic PAT
packet-tracer input outside tcp IP_1 50021 IP_2 21
IS IP_1 is real address and IP_2 is Mapping address ?
Hi all: I have something wrong with ISE. One day,i found ise didn't work. I can't login in ISE with GUI or CLI. So i had to restart ISE. When ISE started,I found ISE load very slowly. I tried with firefox and Chrome. But it still slowly too . Plea...