Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
After upgrade from release 7 to 8 isn't possible to connect via http port 8443 [admin@ITTOCMUSATELLITE ~]$ systemctl status netconsole.serviceâ— netconsole.service - SYSV: Initializes network console loggingLoaded: loaded (/etc/rc.d/init.d/netconsol...
Hello,I have problems with the configuration of the AVC with NCS.I've enabled the functionality AVC on WLC software version 7.5 HA with no problems.I visualize correctly the statistics.I enabled netflow exporter to the Cisco NCS.The NCS does not disp...
Hello,I have problems with the configuration of the AVC with NCS.I've enabled the functionality AVC on WLC software version 7.5 HA with no problems.I visualize correctly the statistics.I enabled netflow exporter to the Cisco NCS.The NCS does not disp...
Hi, The problem in my case was caused by a saving of the configuration from the CLI.This action caused the switchover and later highlighted the problem.to solve:power off the WLC in maintenance mode.Reload the active WLC and turn on the secondary WLC...
Hello,what you see with the command is strange but it is not the cause.I didn't have time to investigate anymore and solved by installing the new version 8-202008 directly on a new server.The biggest work was related to the migration of licenses ......
Thanks Scott, the laboratory tests have highlighted the problem of encryption AES on Release 7.6.100.0.There are two possibility to by-pass the issue.1) modify the configuration on WLAN to accept the encryption TKIP (worked good on 5Ghz)2) Forcing th...
I have a similar problem.I replaced the 3602e with ap 3702e with WLC 5508-HA and some HP client not working properly. This week I prepare a lab to Fix the problem.Have you solved the problem ?Thanks.Rpargal
