Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am in the process of configuring a loopback interface for mgmt/mon and have a few questions. Also suggestions on best practices would be appreciated. When assigning the loopback ip address, is it possible to use an address from a segment on an inte...
I am in the process of configuring a loopback interface for mgmt/mon and have a few questions. Also suggestions on best practices would be appreciated.When assigning the loopback ip address, is it possible to use an address from a segment on an inter...
We have 2 ATM connected hub 3662 routers with RS8234 SAR ATM DS3 module, each with a PVC connecting remote sites using 2621 router with FRX over 384Kbps frac T-1.Each PVC has 192 CIR and 384 burst. Running VOIP and will use LFI and FRTS. Do not want ...
If I understand the problem correctly, you want remote users using cisco vpn client to login into a local database on the PIX. Here is a link to the document I used for basic config: http://www.cisco.com/en/US/customer/products/hw/vpndevc/ps2030/prod...
EZVPN is geared more for hardware to hardware vpn from what i have read.If I understand the problem correctly, you want remote users using cisco vpn client to login into a local database on the PIX.Here is a link to the document I used for basic conf...
I saw these two wic modules, but all the documentation makes you think the NM-1FE2W and NM-2FE2W only work in the 3600's. I have a 2FE2W and my 2620 will not recognize it. Makes me believe there are no FE modules out there, really irritating.Any idea...
