About Bill Sparks

Bill Sparks · 04-11-2017

Hello, I have a UC540 installed at a small business running version 15.1(4)M5 I have had 4 analog lines from the local telco for years. They are connected to an FXO card. I decided to switch to analog lines provided by the cable company for cost sa...

Bill Sparks · 07-05-2016

Hello, I am having a problem setting up a wireless bridge. I have 2 Cisco 1532E access points with AIR-ANT5114P2M-N antennae. One will be connected to the main building (lan connected) and act as a RAP. The other will connect to a remote building (no...

Bill Sparks · 12-03-2015

Hello, I have a AIR-WLC2112-K9 running code version 7.0.251.2. I have a weird issue where sometimes client(s) will connect to the wireless and obtain an IP address, but they won't have network access. It appears to be totally random. I.E. i could hav...

Bill Sparks · 01-20-2014

Hello,I have an CUCM 9.1 cluster. I installed a 2901 router as an MGCP gateway in SRST mode at a remote site. Everything seems to be working ok, but I can't use the Call forward all option on the phone. When I try to forward my ext to my cell phone,...

Bill Sparks · 04-12-2017

Thanks for the response. Internal calls work fine. I'll have to do some debugging of external to internal calls.

Bill Sparks · 07-08-2016

Thanks for the response. I won't be able to have downtime for a while. I found that spanning tree was causing the issue. After making some changes to the stp config, the bridge stays up consistently.

Bill Sparks · 12-10-2015

Sorry I am late with the response. I will try this today and update. Thanks for the information. Bill

Bill Sparks · 12-10-2015

Sorry I am late with the response. I haven't been on site. I will try this today and update. Thanks for the information. Bill

Bill Sparks · 01-24-2014

I resolved my issue. I called my telco provider and they offered an automatic disconnect feature. I had them turn it on and everything is working now. Thanks for all the inputBIll

Member Since	‎01-05-2014 02:42 PM
Date Last Visited	‎08-18-2017 04:28 AM
Posts	14

User Statistics

User Activity

Analog lines not signaling properly after switch from telco to cable company

Wireless Bridge goes down when passing traffic

WLC and client connection issue

Problems with Call forward all

Thanks for the response.

Thanks for the response. I

Sorry I am late with the

Sorry I am late with the

Re: Problems with Call forward all