Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are using CM 3.131 spc with unity 2.46 We have a call handler set-up in unity to tranfer calls to users mobile when they they press one.The issue is that if the call is unanswered it comes back to the Voice mail pilot point number.Though if the mo...
Why is it when you have example.route patterns 0.{8-9] XXXXXXX partition local calls CSS=restriction1localonly0.0011! partition International calls CSS =all calls ie:contains all partitionsYou can assign CSS allcalls under device config for a phon...
The site has about 14 faxes connected to the fxs blade .What has been happening is fax machines are having intermittent failure by this I mean a sender might keep getting re-order engaged tone or communication errorwhen trying to send other times the...
have route patterns changed under this release 3.1 3a the reason is I ahve 2 clusters with different version of Cm cluster 1 is running 3.1 and cluster 2 is running 3.1 3aThey have the same route patterns setup.The problem is I Have a route patter...
I have modems connected to the pots ports of fxs blade in cat 6509 somtimes when I dial another modem it keeps trying to negotiate connection.Other times they connect straight away.Is there any settings that need to be tweaked to fix this.
What are the issues with fax and MGCP 12.2.2xn code vg200 ?I was ging to implement this set-up tomorrow at a site witha vg248 should I revert to h.323 ?
Cofiguration of mgcp gateways is simplified using the web interface very little config on the gateway perhaps vlan for cat blade use dhcp switch type framing vg200.
You siad your using gatekeeper what about intercluster trunks between sites ?It is a distributed model ?I know when using locations number tranforms workMy thoughts would be that gatekeeper is providing Call admission controll allowing calls over t...
Thanks for your feedback appreciate it.What are your plans to counter the itermittent failures ,because for some people here it is not acceptable I am looking at putting in some anolouge lines witch defeits the purpose of buying fxs blades for the ca...
