Hi.Can I using snmp (snmpwalk) to test interfaces Fibre Channel (fc1/10) on NX-OS (7.0.2)?I can view the IfIndex using 'show interfaces snmp-index', but if I use snmp and snmpwalk I can't locate any info about these interfaces. Thanks in advance.Vgar...
Hi all.We have several remote sites, connecting to headcuarters over IPSEC vpn to a Concentrator 3560.The concentrator have a public ip, and the internal interface is on a DMZ firewall.We need to tunneling all remote sites traffic including internet ...
Hi.I have a 4506 with a trunk port.In this port I can see that the counter:Tx-Drops-Queue-1 have 5669 packets drops.The trunk is with an HP switch, the config of vlans in trunk included native is ok.I see the buffers and I think is ok: Input queue: 0...
Hi.Who can I monitor the cpu processes usage on Catalyst switches?Can I do with snmp?, what oid?...Our swtiches are 4500 and 3560.Thanks in advance.V?ctor.
In a enviroment with 4,5 gateways, on callmanager cluster.The gateways are distributed in a large distance sites, with diferent call cost, each site make calls out across his gateway.What Billing system do you use?Thanks in advance.
Hi Jim. Thanks for your answer. I'm using just what you say, but when I try to find any info of our FCx/x interfaces, nothing appears.I tried to do a total smwbulk query to NX, and same result, I could not see nothing of these interfaces. Regards,Vic...
Thanks Michael.In fact QoS is enabled (by default): QoS is enabled globally IP header DSCP rewrite is enabledWhen I put "sh qos maps" I see these values, but I haven't a lot of experience QoS, have a good link to read about?d1 : d2 0 1 2 3 4 ...
Ok, i try to work whith the info on trace file.'how can we persuade Outlook to use cisco TAPI instead of Messenger when I right click on an internal e-mail sender's name? 'I don't know how to make this, i made the same cuestion to to the tecnicians o...