I checked under our service policy in March and the icmp packets were at 13,743Inspect: icmp, packet 13743, drop 0, reset-drop 0I checked it again today and its now at 1,608,004Inspect: icmp, packet 1608004, drop 24, reset-drop 0 Anybody know what co...

We added VOIP to one our of offices and now some people cannot get out to the internet. The ASA has 10 host it can use. I'm guessing we need to add more host to it. How do we add more licenses?

So I need to forward TCP 80 to a 10. IP.on one of our switches. I see this switch has one ACL in it. ACL 199. Do I set up the port on that ACL or do I need to set up a outside ACL just for that port and IP?And do I have to set it up in any other swit...

We are wanting to set up syslogs for our ASA 5510 to go to one of our servers. How do we go about doing this?Thanks           

   So we have FA0/13 configured to use our Aerohive wirless. But for the past week its been losing the turnk config and I have no idea why. Heres the config we have in the 3550 switch for that interface. This interface is trunked to all of our VLANsi...