Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have some concern regarding some messages on both our IAS servers (win 2k server) and the 4400 controller itself (3.2.116.21) I just wanted to know if anybody has any thought on this. I have noticed a lot of these messages on the controller though...
I am having an issue managing a 4404 wireless lan controller via wireless clients. I have checked the box "enable controller management to be accessible from wireless clients" under management. For some reason that does not seem to fix the problem (p...
3500xl :Version 12.0(5)WC102970:Version 12.1(11)AXI have four physical ports setup in group 1. 2970 CONFIG:interface GigabitEthernet0/21-24 switchport mode access no ip address duplex full speed 100 channel-group 1 mode on3500XL CONFIG:interface Fast...
I am using port security on several 2950 switches to prevent unauthorized moves on the network. Currently, there are several hundred computers that do not have a problem. Here is my current config for each port:Version 12.1(19)EA1switchport mode acce...
Hey m2w.. you may want to look into changing your authmode regkey for "machine only" authentication (no user authentication is performed) on those machines. Set the dword value to 2 in the registry. By default, it is set to perform both computer and ...
Thanks for the responses. I tried changing the auth timeout with no luck. The failed auth messages seem to be coming from the same couple clients. I'll look into updating the client computers and let you know if I find anything else.
Yes, the clients authenticate without a problem. 98+ percent of the logs are successful. I am now wondering if a few clients are the culprits. I am seeing a pattern. I get about 6 failed messages seconds apart in the event log for IAS. First on the p...
