jing zhang
Beginner
Beginner
Member since ‎01-21-2014
‎03-29-2020

User Statistics

  • 21 Posts
  • 1 Solutions
  • 20 Helpful votes Given
  • 34 Helpful votes Received
Recent Badges
1 Accepted Solution
 30 Helpful Vote
10 Helpful Vote
1 Helpful Vote
20 Replies
10 Replies
5 Replies
Certifications

User Activity

The customers have multiple sites,one site has CallManager 10.5 ,the ip phones of other sites register on this CUCM, every site connect each other via AT&T Private network; now has a problem,the sip phones eg:7821&8831 of other sites that has no Ca...
本帖最后由 thousandmoun 于 2015-9-1 11:24 编辑 各位,情况大致如下:现场有一台ISE,一台WLC 5508,无线控制器上配置SSID采用“Lyer 3 web policy”(不知道是否需要绑定ACL,不绑定ACL,通过无线连接的时候访问不了ISE服务器),添加radius服务器,并在安全界面添加外部重定向地址,ISE上配置Sponsor;现在的问题就是:连接无线的时候,跳出“Guest Portal”,输入“主赞方”创建的用户名和密码,点击确定时,又会跳转到“G...
如题,CallManager 设置某部IP Phone Call Forward的时候,发现内部电话打被转接Phone是可以的,但是外部电话打被转接Phone的时候会出现呼叫受限,Voice Gateway上出现如下所示:May 15 05:37:25.658: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = 0x00BA Sending Complete Bearer Capability i = 0x80...
如题,Callmanager 备份之后会有一个XML的配置文件,两个版本的配置文件好像不一样,并且10.1.5的版本比7.1.5的版本多出了几个tar的文件,不知到可否将7.1.5上的电话信息导入到10.1.5上来,估计是我不会查,网上没有找到相关信息,不知大拿们能够告知?
本帖最后由 thousandmoun 于 2015-4-8 23:56 编辑 例如在7942G电话上,可以通过查询电话目录的方式查询系统中存在的那些号码么?
Community Statistics
Member Since ‎01-21-2014 07:54 PM
Date Last Visited ‎03-29-2020 01:09 AM
Posts 21
Total Helpful Votes Received 34
Helpful Votes From
Helpful Votes Given To