Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,Is there a fixup in ASA that allows to run a DHCP server inside a NATed ASA.Here is the scenario;-Windows DHCP server on the inside-DHCP client on the oustide-The DHCP server is translated on the outside-ip helper-address pointing to the tran...
Hi all,I have some MSS issue with a ASA running 7.2Here is the scenarioThe client is a web browser (IE 6 or 7 )The server is Appache ( don't know the version)protocol is HTTPS - 443When the client and the server are on the same vlan i get the follow...
Hi,we currently have an internet access with 2 ISP composedof two routers 2821(Version 12.4(11)T) running BGP ( we have an ASN) .We are running two HRSP groups on the pair of routers.Once in a while we lose internet access for a couple of min...
Hi all,I have a strange problem between a Cisco VPN client and aCisco Concentrator 3020 (vpn3000-4.1.7.H-k9.bin) .I created a new User Group on the concentrator, similar to an existing and working one.The main difference is in theIP address pool and...
Hi,Anyone familiar with VRF aware IPSEC ?I am trying to establish two tunnels with two sites having overlapping IP addresses. I want to configure all NATing in the Hub router. I used the following guide but all this is new for me...http://www.cisco...
You can start by adjusting the acls on the asainstead of "access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 10.0.0.0 255.255.255.0access-list outside_cryptomap_20 extended permit ip 10.0.0.0 255.255.255.0 10.0.0.0 255.255.255...
First specify the server address and name of config file with the command;tftp-server inside [tftp IP] /[filename]Then when you want to backup the config just do a " wr net "
Hi , i haven't read all the links related to this post but here is a couple of hints , hope they canhelp>>But the issue is that username&password pop-up. It supposed to pop-up when a client which >>is not joined to domain, or logged on locally not t...
Problem resolved;Finally the problem was on the server . A misconfigured registry was disabling the Path MTU Discovery , forcing the packet size to 536 for all non-local destination IP addresses. ref:Windows 2000/XP Note: The modification of the Wind...
