Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We have some problem with paste large ACLs >50 lines to a cisco 6500 ( and others types also). It seems that after 50 lines some sort of buffer is filled and then, no rules are accepted anymore. We always use the console via a terminalserver (2...
Hello,I'm building a new ACL for a streaming server. And this look like this: 600 permit tcp any host 10.10.10.10 eq 8052 610 permit tcp any host 10.10.10.10 eq 8054 620 permit tcp any host 10.10.10.10 eq 8056 630 permit tcp any host 10.10.1...
Hello,We have several 1200 AP's via dot1q connected, and Cisco PCMCIA adapters. It is possible to see some information of the AP via 'connection status'.Connection status gives e.g. the Access point Name and ip-address. I dont' want to give this kind...
Dear all,I have a little problem with callback via PSTN line. Everything works fine, first the call, than the callback. Only after 120 seconds, the session resets by the router. ( 2610 with ISDN2 and seperate 2 line modem card)Anybody an idea ?The co...
Hello,I have a small problem when connecting to a console port. We make a connection via a terminalserver to the console port of a 6500 (Tacacs+). I like to have a banner before I login on CatOs. The problem with a MOTD is that only the banner is sho...
Rick,I've found the solution. On dialer2 there is a statement of "dialer idle-timeout 1800". Apparently the default time-out is 120 seconds. So I placed an extra statement under the Group-Async1 interface : "dialer rotary-group 2". Problen solved
Rick,The call-back via ISDN works correctly. When I make a ISDN modem call from the laptop to the router, then the router makes a callback, after 120 seconds the ISDN session isn't disconnected. Still working.Until Friday i'm not at work. Friday i wi...
Hi,The other side is a win2000 ibm laptop with integrated modem. Nothing special.By the way, there is also a ISDN module in this router, configured with callback. When I make a call via the laptop, there is no time-out of 120 seconds.
Hello,I've tried to add the dailer-group to the interface Group-Async. That didn't change the behavior.Also a little bit of logging with user: test21Do you have an other suggestion ?Sep 12 14:42:03 CET: %LINK-3-UPDOWN: Interface Async1, changed state...
