Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I can not get this etherswitch module to work with...I've had several people view my config and read numerous articles online. So I'm turning to the Cisco community for help. Currently I use my 2821 as my home router (setup is functioning correctly...
I've been messing with an EtherSwitch module and I can't seem to get it to function the way I want. The router will connect with the ONT and I have connectivity. I can ping the Vlan on the switch from the router....but no traffic, no ip's being pus...
I had a config working great on my 2811, so I thought it should work on a 2821 . Below is the config Router#sh runBuilding configuration...Current configuration : 1858 bytes!! Last configuration change at 04:51:34 UTC Mon Sep 25 2017!version 15.1serv...
So I'm just starting out with Cisco and my boss gave me a 2811 to practice on. I figured I would replace my Centurylink router with it. I was able to find information online and put together the config listed below. I can ping out to Google, my WA...
still nothing, gonna WR Erase and start over...also I apologize for posting this in the wrong group...will pay more attention to that next time. I think that instead of making my Router G0/1 my LAN port I will put all those settings on G1/0 since tha...
forgive me, my knowledge level is very entry level....I did as you suggested and made my DHCP pool 10.0.50.0/24 and I also put the Vlan50 ip helper-address as 10.0.50.0 ....still no luck. I think I have something wrong with my DHCP being pushed from ...
