About arnaudch

arnaudch · 09-21-2017

Dear all, In order to setup an architecture, I am trying to configure a LAB with 2 MDS switches 9148 and a FibreChannel 8 tester.That works perfectly if I use only 1 switch (alone 192.168.1.87). My Tester is connected between port fc1/1 and fc1/2.I c...

arnaudch · 09-26-2017

You're right.That works now.Thanks so much for your help. I really appreciated :) Have a nice week. Arnaud

arnaudch · 09-26-2017

So I added the second zone only on switch 192.168.1.88.I rebooted both of them but the issue stays On 192.168.1.88switch# show zoneset active zoneset name zoneset_vsan55 vsan 55 zone name LAB vsan 55 * fcid 0x070000 [pwwn 10:00:00:00:00:01:00:01]...

arnaudch · 09-26-2017

Sorry, I had to do on 1 switch. Let me fix that

arnaudch · 09-26-2017

Ok,I've just added these following commands on both switches:zone name TRUNK vsan 55 member interface fc1/15 zoneset name zoneset_vsan55 vsan 55 member TRUNK But the issue persistsshow flogi database vsan55 shows the same results:192.168.1.87switch#...

arnaudch · 09-26-2017

You mean a "show flogi database vsan 55" command ?So If I well understood, I need to create another zone behind the zoneset LAB for both switches, right ?

Member Since	‎09-21-2017 08:54 AM
Date Last Visited	‎09-26-2017 05:26 AM
Posts	10
Total Helpful Votes Received	1

User Statistics

User Activity

Issue to connect to MDS switches

Re: Issue to connect to MDS switches

Re: Issue to connect to MDS switches

Re: Issue to connect to MDS switches

Re: Issue to connect to MDS switches

Re: Issue to connect to MDS switches