Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Cisco Aironet 1100: after configuring "power local 50" under the dot11radio interface the ability to return back to 100 mW have disappeared. 50 mW is shown as the maximum available power.What is this? What can you suggest to do?Thanks a lot in advanc...
Cisco IOS version 12.3.6a, 12.3.5a, etc does not have "xmodem:" or "ymodem:" for "copy" command in enable_15 mode.These URLs were present in major version 12.1 and 12.2. Is this a bug or a feature?;) What version can you suggest to upgrade to?
I have configured CCM 3.3 CCM Attendant Console. In the Hunt Group Configuration there is one member: Call directory number 2199. When incoming call on Pilot Point is placed (number: 2111) the person who initiated this call sees on the screen 2199 in...
I have configured CCM 3.3 CCM Attendant Console. In the Hunt Group Configuration there is one member: Call directory number 2199. When incoming call on Pilot Point is placed (number: 2111) the person who initiated this call sees on the screen 2199 in...
Here is the part of sh run:!interface Dot11Radio0 no ip address no ip route-cache<...output omitted...>!speed basic-11.0 rts threshold 2312 power local 50 power client 50 station-role root no cdp enable dot1x reauth-period 3600!
Here is the part of sh run:!interface Dot11Radio0 no ip address no ip route-cache<...output omitted...>!speed basic-11.0 rts threshold 2312 power local 50 power client 50 station-role root no cdp enable dot1x reauth-period 3600!
