Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Here is my scenario. I have a site-to-site VPN between the Corporate Office (3005 Concentrator) and the remote office (2MBup/down with a Cisco 1712 Router).My issue is that HTTP traffic seems to be taking priority over traffic destined for the Corpor...
I have two remote offices with 506E PIX Firewalls that connect to our Corporate office which has a VPN3015. This works fine, my issue is that now they want to be able to create an additional tunnel between the two remote offices as well (for failove...
I have segmented a 3524 switch into three different VLANs. One is the managment VLAN 1 and the other two are for my Test Lab and Production network. I don't want either VLAN to see the other (router between them). My problem is my VLAN10 and VLAN1...
I was wanting to get ya'lls opinions on this and see if ya'll think it might work.Basically I have two locations (Amarillo and Chicago) that I want to connect together using VPN and OSPF (loadsharing). Each location will have two internet T1's comin...
I got it working, actually it was working all along, my server guy had his TCP/IP stacks all messed up and after I went into each server and fixed them everything started communicating.I new this was a layer 2 switch and that it wouldn't route, but I...
the IPSec tunnels use a lot of CPU also. I assume that you added a VPN Accelerator card to your router in question? If not, then you need to and that will help a lot with your CPU issues.
I would check downloaddotcom for the software you are wanting, but with the issue of slow transfers over VPN you might want to look at your MTU settings on your routers. Also, I don't know what kind of routers you are using but the VPN accelerator c...
Yes, I was planning on using OPSF to learn the routes. I had talked with TAC yesterday and they stated that I wouldn't be able to use OSPF though because you can't loadshare across more than one IPSEC tunnel. Have you ever heard of this? There is ...
