Is ther any quick tip on how to configure 2 1200 AP's as bridges with high security.The AP's are supposed to be an extension to the existing LAN and not supposed to handle any wireless clients.Any response will be helpfull.

Hi!Running ACS 3.3(2) mapped with NT domain (which the ACS server belongs to). Is it possible to also authenticate wireless users belonging to other domains or user databases at the same time..?

I'm currently configuring 1310 workgroup bridges to act as clients. The bridges has PLS's connected on the ethernet interface. The challenge is to be able to configure the bridges to use EAP-FAST or other, more secure, method for authentication. Plea...

I try to authenticate a 1300 Worgroup bridge with EAP-FAST. Using ACS 3.3(2) Build 2 and 1231 AP's with WDS.Is there anyone who has tried this configuration. Ordinary wireless clients are OK.

I have a 2940 and a 2950 set up with dot1q trunk.The 2950 is VTP server and the 2940 is VTP client.There are several vlan configured on the 2950 and I want these vlans visible on the 2940...If I issue the "show vlans" on the 2940 ony the default vlan...