Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to configure an Extreme Networks EAPS rings through a 2950 switch. Their are 3 vlan configured on the cisco switch. Data, Voice and a control vlan for EAPS. Basic diagram: Extreme1 - Cisco - Extreme2 - Extreme1. All connected to each ot...
We are using 802.1x/PEAP with IAS 2003 server. We are having problems with computers not being authenticated to network. If a user has already has a profile on the computer they are authenticated, however if they log off and the next user does not ...
I have a guest wireless wlan setup. When guest users attach to our guest wireless they are prompted by the built in web security on the WLC's. Cisco talks about how to setup the WLC to route web authentication to an external web server, but they don...
You can keep both controller up until you are ready to switch. The AP's will not attach to the new controller until you add the new wlc to the AP's. If you want both controllers running at the same time you need to add both to the same mobility gro...
I had the same issue. I'm running the same code on my WLC's. I called TAC and its a bug CSCsj72274. To fix the issue I had to enable CDP on the controllers. Type in these commmands for the controllers CLI:To see if CDP is enabled: show cdpTo ena...
The ASA 5505 will work with DSL or Cable. By default the outside interface is set up to get a dhcp address. If DSL needs a login, you should be able to have the ASA use PPPoE and use the login info. I haven't used the ASA on dsl yet put I have man...
