Hi,I have PIX515 with 5.3. Currently I cannot get into the PDM because I forget the password.Could anyone tell me, how to add a name with password in CLI so I can use it for PDM?Thank youHendarto
Hi,can anyone tell me how to configure a VPN Router (1721) so that the VPN Client Software connecting to that router still can communicate with that VPN Client Local LAN?PC(VPN Client)---LAN---Router---Internet--VPNRouterThank you.
hi everyone,What command should I use to get to know whether MMTL has already been installed or not?What commands can I use after MMTL has already been added?Thanks for the help.Hendarto
--begin ciscomoderator note-- The following post has been edited to remove potentially confidential information. Please refrain from posting confidential information on the site to reduce security risks to your network. -- end ciscomoderator note -- ...
sir,my problem actually is about designing the right module for async connection in 1841. Unlike 1700 series, the 1841 has no info regarding async connection capability in wic-1T. (not using wic-2as).thank you.
I tried to create a simulation on VPN Client but it's also not working. Here is the config:LAN--(F0)VPN1721(s0)--(s1/0)2611(E0/0)----VPNClientLAN = 10.10.10.0VPN1721 (F0) = 10.10.10.1VPN1721 (s0) = 172.18.124.1592611 (s1/0) = 172.18.124.1602611 ...
Sir, thank you for your help.However, another the problem is that some PCs can access the local LAN when they are using VPNClient connecting to the HQ but one PC cannot. Is it related to the split tunneling config in the router? As I concern, accordi...
yes, I replaced the modem from us-robotics courier with hayes. I use us-r for both the PC and the router. As stated in the router config: modem autoconfigure type usr_courier. I believe the modems setting is just not right for the callback but I dont...