EE_36220
Level 1
Level 1
Member since ‎06-03-2010
‎05-17-2023

User Statistics

  • 44 Posts
  • 0 Solutions
  • 30 Helpful votes Given
  • 11 Helpful votes Received
Recent Badges
40 Discussion Posts
5 Discussion Posts
30 Discussion Posts
20 Discussion Posts
First Discussion
First Question
10 Discussion Posts
1 Reply
1 Helpful Vote
10 Helpful Vote

User Activity

Hello,In a 5508 WLC HA scenario with one WLC having a valid AP Count license and the other WLC having a HA SKU, in case the primary wlc failed for an exceptional long period of time, is there any limitations during the time when only the secondary wl...
Hello,In case I have to implement a wireless network with 15 Catalyst 9124 access points using the Embedded Wireless Controller solution, do I need to use the EWC AP image for all the 15 APs or just for those serving the primary and backup EWC role?T...
Hi, The 5508 wlc service port is configured to use dhcp instead of static ip address, however, when I connect a notebook with dhcp server software to the service port, it cannot obtain an ip address from the dhcp server.   I tried 'OpenDHCP' and the ...
I have a case in which due to environment constraints, if mounting the IW3702-2E vertically with 2 omni directional antennas pointing upwards and 2 pointing downwards, there would not have enough clearance such that the upper 2 antennas would be bloc...
Hi,   From the “Cisco Industrial Ethernet 4000, 4010 and 5000 Switch Software Configuration Guide”, “Chapter: How to Configure EtherChannels”, https://www.cisco.com/c/en/us/td/docs/switches/lan/cisco_ie4010/software/release/15-2_4_EC/configuration/gu...
Community Statistics
Member Since ‎06-03-2010 10:21 PM
Date Last Visited ‎05-17-2023 12:01 AM
Posts 44
Total Helpful Votes Received 11