Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,i'm going to test the PVLAN on my cat6509.I've the FWSM and IDSM2 on the same chassis.If i not use the PVLAN right now, it is possible to configure them after ( when the swith in on production with vlan) or i must do something as prerequiremen...
Hi all,i would like to configure PVLAN on my cat 6509 with FWSM2.2(1) and IDSM2.Due that the default gateway for all VLAN is the FWSM, is it possible to configure this virtual intefrace as promiscuos port?? If not there is a work around??ThanksMarco
Hi all,i've registered this error on may cat 6509.If i do the show enviro command the output is:<<system minor alarm on operating clock count (raised 00:54:09 ago)system minor alarm on clock 2 OK (raised 00:54:09 ago) >>What is the clock?? Is it on b...
Hi all,i've one question about FWSM configuration: if i've 3 VLAN associated to firewall with same security ID and i use the same-security-traffic permit command, is necessary to implemet ACL to permit traffic between them or not?Thanks
1) pdm logging... -> means that the pdm ha a buffer of 100 information messages 2) nat (inside) 1.... -> means that all traffic that comes from inside interface must be translated
No is not possible as you can read on the cisco web site << Using a pair of identical PIX devices (model, memory, network interface cards (NICs), operating system versions), high availability can be provided with no operator intervention>>If you use ...
Hi Milan,thanks for your reply. I'm not able to activate uplinkfast on 4908, but i don't know if it's a IOS problem or it's not a feature of this switch.I haven't found this info on the web site.The root bridge is the catalyst, is incorrect??Thanks M...
