Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello I have a 6807XL with VS-SUP2T-10G, and the 10 Gbps Line Card WS-X6816-10GE, when I tried to provision the join of the 6800IA, I got theses errors.CORE(config)#interface tengigabitethernet 1/1/1CORE(config-if)#switchport mode fex-fabricCommand r...
Hello I have a 6807XL Switch, and I want to migrate to Instant Access solution, which 10 Gbps Line Cards must I buyWS-X6904-40G-2T or WS-X6816-10G-2TIn order to the Cisco 6800IA can joint to the 6807??Regards Rafael Barba
Hi Friend.I have a Cisco 5550, it ASA has 2 internals IP address 172.16.6.150 and 172.16.6.152, the both ip address must have only 1 outside ip address 10.80.10.9, but the connections must be as the following. When many machines send traffic to the 1...
Hi Friend I have a Cisco IPS 4255, and I put all the upgrades that Cisco recomend. So, I put the ARES signature with TCP RESET like the action, but the ARES is working without the problem, and I need to stop these traffic. How can I stop the ARES P2P...
I FriendI have a problem with a Cisco 7985G video phone, but It is not booting, into the screen appear config VLAN, ip address after Quering TFTP server 172.20.98.250, but nothing happend, I checked the conectivity and everything is OK, also I have i...
Hello FriendThank you for your answer, I see that the Q&A is recomending me the WS-X6904-40G-2T , but what happend if I have the line card WS-X6816-10G-2T the Instant Access should be works??, or is there some kind of limitation with it line card (WS...
Hi friend.Do you have any answer, about hi can I block the ARES with the IPS 4255??, I sent you my signature configuration, but I did not receive nothing. Could you help me??RegardsRafael Barba
Hi friend.Thank you for your answer, You know that the ARES signatures is not firing, I don not why??? I am sending 2 pictures ipslog1.jpg (is my signatures configuration), ipslog2.jpg (is the action configuration), What must I do in order to fix thi...
Hi friend thank you for your answer, my sensor is in-line mode, and I have configured the signture with both actions.TCP reset and deny inline packet???, Should I change the action to other???, please tell me wich one???RegardsRafael Barba
