Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am learning network from 2 different interfaces I want to prefer one over the other I am trying to use distance with the access-list command but it is not influencing the distance. I have tried this command for internal routes and works fine but fo...
Is it possible to maintain 802.1q VLAN tagging across a WAN connection using either Frame Relay or HDLC encapsulation over an L2TPv3 WAN? The topology we are looking at involves several remote clients using c2600/c3700 series routers with DS1/DS3 ci...
Hi, Here is our current setup. If users tries to access production network they are prompted by PIX for authentication, PIX pass there credentials to ACS server and if sucessfull the machine from whcih the user accessed network gets authenticated for...
Hi,Currently we are using PIX 525 with ACS server for user authentication once the user (workstation) got authenticated PIX maintain the information for 24 hrs (user will be prompted to authenticate after 24 hrs). Average CPU utilization is 2%Now we ...
That will change the distance for all the internal and external routes learned through eigrp, however I want to change the distance for specific route learned through specific source.Like in this example.R2(config)# access-list 99 permit 10.1.3.0 0.0...
