About promig

promig · 06-10-2008

I'm sure I'm missing something very basic, but I can't figure out how to get debugging messages to display to a monitor (i.e., ssh) session on a 3750. If I connect directly to the console I get the messages as expected. I've set the logging level f...

promig · 03-02-2007

All,Anyone have any wisdom they are willing to share regarding the establishment of a L2TP over IPSec tunnel between Mac OS X and a 3000 series concentrator? I believe that the concentrator is accepted the IKE SA proposal, but I can't get any furthe...

promig · 08-29-2006

I'm looking for an SNMP variable that will give me a list of the APs associated with a WiSM controller. It looks to me like I want some of the values from CISCO-LWAPP-AP-MIB (1.3.6.1.4.1.9.9.513). However when I query the controller it claims that ...

promig · 08-25-2006

We have the following scenario: as a small university we have wireless access points on our academic campus and our residential buildings (i.e. dorms). We have one WiSM blade installed in a 6509. In the current (heavy-weight IPs) situation APs in t...

promig · 08-22-2006

We have a (brand new) WiSM blade installed in a 6509. The configuration looks ok, but when we try to register (join?) an AP with the controler the process fails. The controler shows the AP in the status display but the AP reboots, claiming that no ...

promig · 09-04-2006

Yes, those are the OID's I thought I should be using as well. However when I query anytihng in those trees, the WiSM blade resonds with an error (i.e. no such variable/OID).

promig · 08-30-2006

Thanks again for your reply, how sure are you that the AP Group VLANs feature should work the way you describe? To test the feature I enbled the group feture, created a Group, added one of my two WLANs to the group, and reset the AP. As near as I c...

promig · 08-29-2006

Thanks, I think this is what I need, however when I created the VLAN group and added the dorm WLAM to the group the column in the main display that says "WLANs" still says 0. It looks like it is working but I wonder why I don't see 1 WLAN assigned t...

promig · 08-24-2006

Turns out the SlotID 0 issue was a red herring. There was a bug in the network topology that prevented the join-reply from reaching the AP.

Member Since	‎03-30-2004 12:15 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	10
Total Helpful Votes Received	15

User Statistics

User Activity

Display debugging on monitor (ssh session)

3000 series concentrator and L2TP over IPSec

OID for APs associated with WiSM?

Limit SSID to a group of APs

Can't join AP with WiSM controller

Re: OID for APs associated with WiSM?

Re: Limit SSID to a group of APs

Re: Limit SSID to a group of APs

Re: Can't join AP with WiSM controller