Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all, I have an indoor mesh network comprising of several 3602i access points and a 2504 wireless controller. Referencing the diagram below; I'm having throughput issues from "test pc 2" and "test pc 1", where I'm only getting around 50-70Mbps o...
Hi guys,In order to reduce the amount of policies that I need to configure on my security router, I'd like to be able to reuse policies for multiple zone-pairs, including for the self zone.But if I configure a zone-pair that includes the self zone, a...
Hi guys,For the purposes for NAT overload, if had my "outside" interface as Gi0/0 and my "inside" interface as VLAN120; and I wanted to police ingress traffic to an IP address in VLAN120 using an ACL with the inside local address as the destination.....
Hi Scott, Thanks for the clarification on wireless being half duplex... I did find this article which states that serial backhaul links loose 30-40% throughput per hop. So say the RAP is roughly 200Mbps (accounting for half duplex), the first hop cou...
