Hi,Can I know the procedure to upgrade the IOS on C3750g switch which is connected in Stack, via stacking cable/port on backside of switch. This is represented as single IP/switch in the network.Awaiting reply,
Hi,Can any one let me know the procedure to add ASA (asa803-k8.bin) with multiple context on CSM Ver 3.0.1It is accepting the ASA with single context.Please advice,Raj
Hi all,We have configured ssh on router and its working but, as telnet was used earlier We need to disable Telnet now unable to find the right solution. Do we need to disable line vty or ???Please assist,RB
Jim,I think U have made the correct selection of IOS,We do have the same IOS Version 12.4(13r)T, and this support SSH V2.R01#sh sshConnection Version Mode Encryption Hmac State 514 2.0 IN aes256-cbc hmac-sha1 ...
Hi Toshi,Infact I have referred the same doc from cisco.com and configured as mention. SSH is working fine but I need to disable telnet.R01#sh ip sshSSH Enabled - version 1.99Authentication timeout: 60 secs; Authentication retries: 3 Any other option...
Dear Rupesh,I appreciate ur help on the subject, but unfortunately I am unable to get the solution as suggested, is there anything else beside line vty 0 4 config. I have tried both eg below. Still I can use both SSH and Telnet and are aunthenticated...
Hi,This is my current config on line vty. still I can use both SSh and telnet.line vty 0 4 exec-timeout 7 0 password 7 030752180500 transport preferred ssh transport input noneThanks for ur reply,