I have several voice trunks, but I am having an issue with one of them. I will shut, no shut the voice-port and all is well for a couple hours to a day or more, but the trunk eventually disconnects seemingly random. Below is part of the config f...
I am trying to tie two analog modems together using FXS ports and a trunk connection. The problem is that the modems do not provide signaling to "go off hook". Does anyone know of another way to do this? Would hoot 'n holler make any difference? T...
We have a L3VPN MPLS core connecting several sites. each site has one or more T1s connecting into a Cisco ISR 4331 with a nim-4mft-T1/E1 card. My question is how to transport that T1 to another site over the MPLS core? We are just trying to find...
I am new to voice configuration and need some help with my config. I do have PVDM modules installed on the NIM-MFT cards. Avaya PBX ---T1 pri---- 4331 w/mft t1 card --------MPLS---------4331 w/mft t1 card ------T1 pri-------PBX I have the T1 pri's ...
The modems are connected to radios and when someone talks it goes through the modem and then supposed to go through the voice port on the ISR. I can get the trunk up all of the time, but since the modem does not have signaling to tell the voice port...
