Hi team!Are input classification counters correctly displayed for the IE5000 and "show policy-map"?They all seem to be zero on my switch, for example: Service-policy input: my-policy Class-map: class-default (match-any) 0 packets, 0 ...
Hi there,I noticed an incomplete MST configuration when troubleshooting a client's network for packet drops:what are the implications if the "name of the region" and the "revision number" are omitted?The MST seems to experience topology changes so so...
Hi there, Is the Cisco TrustSec Macsec ("Cisco SAP") supported in the ESS3300-switches? According to the release notes it should be supported I reckon, but for some reason I fail to configure it:https://www.cisco.com/c/en/us/td/docs/switches/lan/cisc...
Hi,A client of ours cannot view the monitoring dashlets (ISE 1.2) using Internet Explorer 10-something (platform W2012 server, Adobe Flash Player 11.7).There are no messages about invalid certificates.Anyone experienced this?Kind regards,Lennart
Hi all,I need to change the IP addresses in an ISE 1.2 HA deployment (a primary/secondary pair). The tricky part is that the deployment was broken before I could get my hands on the servers.I can make the primary server stand alone, and perform the a...
Hi guys,I went thru all the ports, and added some missing "portfast edge".I also found a "P2p Bound (RSTP)" to one of the non-Cisco switches: MST was not activated on that port of the non-Cisco, which of course was a major mistake.The network has bec...
Thanks you for your answers!Attached is "sh spanning-tree".The Te1/25-27 are to other Cisco switches, the rest of the interfaces are access ports.(and here I noticed Gi1/13 & Gi1/25 are missing the portfast command)Thanks,L Walfors
Hi,spanning-tree mode mstspanning-tree extend system-idspanning-tree mst 0 priority 20480The problem description was "packet drops" but it is the topology changes that caught my attention. For instance: #show spanning-tree vlan 1 detail MST0 is exe...