Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a totally isolated newly installed Windows Server 2008. It is the forest root, DC, GC, DNS and Netbios server and has ACS installed directly on it. When using local database in ACS user account it works great to AAA Tacacs Auth. When trying...
Site APublic internet router (x.x.x.x) goes to firewall public facing hosts static nated through firewall on dmz interface.Connected to Site B with WAN link separate router.Site BPublic internet router (y.y.y.y) goes to firewall. Site only used for o...
Hello,We have a dual chassis core with single sup 720-3B's. I am planning on upgrading them to dual sup 720-10G-3C's without VSS for the time being. So the question is can I do a zero downtime upgrade by installing the 3C sup in with the existing 3...
Hello,Please help I have read every doc on this AP and this antenna. there are three jacks on the radio labeled a - b and c. There are three cables on the antenna. which cable corresponds to the correct radio antenna label. Or does it not matter....
Cisco has conflicted information on this front. They are very unclear at to what exactly they support on the 2008 platform. This is unreal. I have actually begun to work on removing ACS all together for another radius platform. Microsoft NPS is w...
Pass and fail logs with all fields selected attached. Not Sure what the RDS log is. This is still failing. Works fine for local auth but fails when passing to AD. Thanks for the look. I hate to think this is not compatible with 2008 AD.
I have a similar problem. In fact mine is more cut and dry. I have a totally isolated newly installed Windows Server 2008. it is the forest root, DC, GC, DNS and Netbios server and has ACS installed directly on it. wen using local database work g...
Paul,You can have multiple tacac-servers... If possible you can stand up a new install of the 4.2 rather then upgrading your existing single server. Use LMS to add the second sever to all your switch configs. once they are all populated and configu...
Thanks for the quick reply. I have of course already looked at the upgrade guidelines you have linked in your reply. It seem reasonable based on those guidelines that since we are going from last minor (7.2.x) to the next major (8.0.x) that the pro...
