Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 340 series AP and have already installed the driver for my 350 series PCMCIA LAN adapter.I've checked that the AP has a valid IP (10.x.x.x) assigned to it(on our core LAN switch).I get a 169.x.x.x IP address.The Aironet Client Utility(ACU) s...
Our LAN consists mainly of 2950 switches plus a 3550 and 3750.I have a WIN 2000 machine to be the clock source.(I set the LocalNTP value in the registry to "1")Have tried configuring the switches with "ntp server 10.1.1.10 prefer"Before this, I've ma...
I wish to get my 3750 obtain its clock from a windows 2000 machine.I've told the switch to get its clock from the win 2000 machine using the command "ntp server XX".The output of the show ntp status is below:Clock is unsynchronized, stratum 16, no re...
Thanks everyone for your input.I managed to solve this issue in a different thread some time in October 2004.My apologies for not letting you know about this earlier.Summarised below is what I did:1)configured 2651 router(which acts as our core WAN r...
UnclePaul,glad you got it working.seems like your ACL 111 has replaced ACL 101.eh?and contrary to one of your earlier posts there is not 1 deny statement but many(in the config you originally posted)...but yes...there is only 1 deny statement in your...
But its also true that a "global command" can be overridden by an interface config command??For e.g "isdn switch-type..".So its not really true "that a global command will affect the operation of a router"Actually, if I remember correctly,I came acro...
NAT seems to be working.It could be the arrangement of statements in ACL 101.By the way,may i ask..what is the reason for:1)access-list 101 deny ip 10.10.10.0 0.0.0.255 anyand2)access-list 101 deny ip 10.0.0.0 0.255.255.255 anyin your ACL???it se...
