Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I have problem with ip inspect. I have Cisco 2811 connected to 8Mb/s line with this config (only important parts):ip cef!!no ip bootp serverip domain name cebia.czip name-server 80.95.96.7ip name-server 80.95.96.11ip inspect log drop-pktip ins...
Hello all,I have this problem: I have two PIXs connected each other for LAN and stateful failover. They are connected by UTP cable through interfaces Ethernet0, where are two sub-interfaces are made (1 for LAN FO, 1 for stateful failover). With OS 7....
Hello,I have question about DHCP server configuration on Cisco 1812 router. I know I can set multiple DNS servers in DHCP server configuration - for example Router(config-dhcp)# dns-server 1.1.1.1 2.2.2.2But I would like to have something like this f...
Hi,please could someone help me with this problem?I have remote office (RO), connected to headquarter (HQ) through VPN tunnel. On RO is router Cisco1841, on HQ is PIX-515. All trafic from RO is PAT-ed to address 172.16.1.10 before encryption. This wo...
Hello,I have this problem: I have some users, who connect to PIX-515 (OS 6.3.4) by Cisco VPN Client. Xauth is provided by ACS 3.1. It is works well. But now I need divide users to 2 groups and each group will have different ACL for access to inside n...
Here are some additional information:PIX configuration: pls see attachment.Here is excerpt from "debug radius" cmd output when I try connect through VPN:pixfirewall# debug radius(output ommited)attribute: type 11, length 12, content:008209a0: ...
