Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 2 WAAS boxes redirected with WCCP (promiscous lists 61/62 on 3800 routers)...We have deployed before like this with no issue but in this case, for some reason, it appears the CIFS traffic that is tunneled over port 4050 between the pair of box...
What if, I wanted to use TWO wan optimizing pieces of hardware--One WAAS and one another vendor? Both "Head-End" devices would need to use a WCCP redirect off the same GIG and POS interace (with a different ACL and WCCP number) BUTTTT..the problem it...
I have a 6509 w sup720-10Ge and all am trying to do is have a separate voice and data queue on an uplink (which is just a gigport on a WS-X6748-GE-TX)Again, all i want to do is have 2 queues..one for voice/one for data and trust the 46 markings comin...
So today in the Frame-relay world where we have traffic shapers and hierarchical policies, each policy-map associated with a bandwidth value can be leveraged to use percentage-based policing.For example, for a 256k circuit i can have a common policy:...
Every example I see and what we have deployed is WRED "Random detect dscp-based" on our "class class-default"Why is it, that you wouldnt stick "random-detect" on the other classes you have defined OR would you? Shouldnt RED and the Tail-drop (Weight...
Thanks for the command!Yes you are absolutely correct! We just ran into the same thing on a 4507 in which I kept typing in"Qos map dscp 46 to tx-queue 3"and the thing kept disappearing from the config...go figure, its a default command :))Thanks aga...
Thanks Ilya.Thats a good idea I didnt think of that.Yah the Video is just multicast outbound protected--you actually can put in now a mix of percentage based and hard-bandwidth (12.3(10e code)... The Voice in that particular class is just some call-...
Thank you itya, it does helpLet me ask one followup.I mark with DSCP on either a 6509 switch or the Fastethernet on the wanrouter, for the particular class ie:policy-map Fastein class voice-in set dscp ef class video-in set dscp cs4 class inte...
I know you CAN but Im just wondering why would you?I guess the real question is:If I am trying to drop things first in the default queue randomly, I apply "random detect" there. If then I want to drop things randomly when queues are exahasted, (it i...
Hi --- The OC3 limitation (155mb/sec) was in 12.3(X) code ---we are now running 12.4 code --- Version 12.4(5a) to be exact....and this is now up to 2Gig for the limit on the policer:Router(config-pmap-c)#police ? <8000-2000000000> Bits per second ...
