Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We have a hardware supplier that need to connect a cisco switch to our backbone network. We also can't manage this switch, the problem now is that the switch can send CDP info, VTP updates, Spanning Tree etc ... to our switch port.Is there a way w...
Hi,I've got a cisco 17xx router with a 2MB connection and some branch offices connected with VPN tunnels to this router.Since a few days we have some annoying delays.Since the router is the only device between the LAN and the internet, what commands ...
Hi,I've got a cisco 17xx router with a 2MB connection and some branch offices connected with VPN tunnels to this router.Since a few days we have some annoying delays.Since the router is the only device between the LAN and the internet, what commands ...
What would be the main difference (except the price)Between those modules:WS-X6148-GE-TX= Catalyst 6500 48-port 10/100/1000 GE Mod., RJ-45andWS-X6548-GE-TX= Catalyst 6500 48-port fabric-enabled 10/100/1000 Module
Hi,Since a was browsing through this forum I noticed that there are lots of problem with DHPC request and the AP 1200. Well here is another "simple" problemOne "out of the box" AP1231 Upgrade to IOS : c1200-k9w7-mx.123-2.JA2Configuring SSID and WEP 4...
Of course we can ask them to configure the switch like it should be. And I'am sure they would, but we don't have control if they do some wrong configuration in the future.We like to block that kind of traffic on our side, not on them switch.regards,-...
Hi,as the module WS-X6748-GE-TX has a 2*20GB link the the sup720 switch-fabric engine I would be able to connect some ports at non-blocking on this modulewouldn't I ?http://www.cisco.com/en/US/partner/products/hw/switches/ps708/prod_bulletin0900aecd...
Aashish,If I connect only 19 ports on the X6748-GE-TX module those ports would still be non-blocking?Is it true I can use max. 32 ports to keep this module in non-blocking state?
If I use a supervisor 720, switch fabric is also enabled. isnt it?So when I use the second module, al the interfaces on this card would be non-blocking, correct?I really need some ports on the core for out dedicated server that have a non-blocking co...
