About BenEvans77

BenEvans77 · 04-07-2015

Hello, I'm hoping this is the right place to make this post, if not please recommend a better discussion area/group.I was looking at trying to use the CCP software on a Windows XP and/or Windows 7 machine to connect to a 4331 router but it returns "...

BenEvans77 · 04-01-2015

Hello, I'm hoping this is the right place to make this post, if not please recommend a better discussion area/group.I was looking at trying to use the CCP software from a Windows XP and/or Windows 7 machine to connect to a 4331 router but it returns ...

BenEvans77 · 04-01-2015

Hello, I'm hoping this is the right place to make this post, if not please recommend a better discussion area/group.I was looking at trying to use the CCP software from a Windows XP and/or Windows 7 machine to connect to a 4331 router but it returns ...

BenEvans77 · 03-14-2015

Hello all. I hope you will help me with this as I've put more time in to this project than I care to admit. Please? The last big problem that I resolved was that in IOS 12.4 "established" connections were allowed automatically in the ACL for the outs...

BenEvans77 · 03-16-2015

Thanks for the reply Jon. I think you are correct that the DNS Doctoring / DNS Rewrite is not working like it did in IOS 12.4 and that in combination with the lack of a hostname record on the DNS server is sending the traffic outside. I'm going to sp...

BenEvans77 · 03-15-2015

Yeah, when I first mentioned the IP's I was masking the real ones. The real are in the config I gave you in the nat translations. You can identify the mail server by looking for a port 25 and 703 in the NAT.DHCP is done by Windows Server 2008R2, that...

BenEvans77 · 03-15-2015

Jon here are the configs with no ACL's. I stand corrected on the IP Name Servers. They are different, though I think I might have changed that in trying to troubleshoot the new config on the 4331. To test though I went in to the 2811 and changed them...

BenEvans77 · 03-15-2015

Thanks for your Response Jon.Give me a bout an hour to clean up each config. Then I'll attach them in a zip.

BenEvans77 · 03-15-2015

Thanks for the reply Jon.Unfortunately I'm not sure what to tell you. On the internal DNS servers, the mx record does not exist for the domain. In reverse lookup the old hostname exists though and resolves to the IP. So mail.mycompany.com does not e...

Member Since	‎03-14-2015 09:50 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	10

User Statistics

User Activity

CCP 2.8 (Cisco Configuration Professional) not supported on ISR4331 K9/SEC Router?

Cisco Configuration Professional not supported on ISR4331 K9/SEC Router?

Cisco Configuration Professional not supported on ISR4331 K9/SEC Router?

Upgrading router from 2811 (IOS 12.4) to 4331 (IOS 15.2).

Thanks for the reply Jon. I

Yeah, when I first mentioned

Jon here are the configs with

Thanks for your Response Jon

Thanks for the reply Jon