We have configured password locked out policies and noticed that once we enabled External User Authentication, the admin account does NOT get locked out, this has been tested on SMA 11.5.075.When disabling the external authentication, the admin accou...
Current environment layout:
UCS 3.2(2b), Windows HyperV 2016, SCVMM 2016, Nexus 7k, Fabric Interconnects
We currently have configured SRIOV as a single native VLAN, this is fully operational.
There is a need to add an second VLAN to the current c...
I am in the process of upgrading the MDS9148s from firmware 9.2.1(13) to 9.2.1(19).
The original upload was successful, but I was getting validation errors. Because what I now know to be the wrong commands.
In the process of troubleshooting I issued...
Can the Cisco UCS Virtual Interface Card 1225 be configured as an iSCSI storage adapters in VMware 6.0
Currently the VIC 1225 is only listed as FCoE storage adapters and the switch and storage don't support FCoE (bummer).
I know it does support "boot...
Yes LDAPS is supported, simply change the port and enable SSL communication under the LDAP server attributes. https://www.cisco.com/c/en/us/td/docs/security/esa/esa11-1/user_guide/b_ESA_Admin_Guide_11_1/b_ESA_Admin_Guide_chapter_011010.html
I assume your email from outside isn't going directly to the Exchange, you are directing it from a FW or an external facing device, simply change the IP on the device to send the emails to the ESA, the IP that is the public listener if you have a two...
Thanks, we get the notification, realized that for some unknown reason that the admin account isn't getting locked out, other account do, but not admin :(.
I have opened a TAC case, thanks for the reply.
Thanks for the reply.The security department has a software analysis tool, I don’t have the detailsI’m curious to know if you upgrade from version AsyncOS 9.7 to version 11, does the FreeBSD also get upgraded or only patched. Version 9.7 was running ...
