Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I noticed the hard coded speed and duplex settings for interface Management 0/0 do not replicate from the primary to the standby ASA. Do I have to manually hard code these on the secondary? Will the settings keep after the unit restart since it get...
I need to remove an AS # in the path before passing the route on to our provider. I know the "set as-path prepend" command can add AS #s to the path, but is there a way to remove the current AS# before sending it on to our provider. Example. Router...
TAC was able to solve issue. Needed to changed webvpn mtu from default of 1406 to 1200.Not sure why 2 other ASAs we have work fine with default though! webvpn svc mtu 1200
Having same issue with only Windows 7 clients. Running anyconnect-win-2.5.2019-k9.Have two other ASAs running same IOS and same anyconnect version. Windows 7 users connect fine to there.Just opened case with TAC.
I tested "remove-private-as" on our Internet router and it did the trick. It removed our internal ASN of 65100, but still kept 64517.Thanks for the help.
We just bought 2 and our experiencing the same intermittent connectivity issues. We seem to have more problems with PCs than with the Cisco WiFI IP phones. We are drawing power using Cisco's pre-standard PoE (WS-X6348 module in Catalyst 6000).Some h...
